Heating & Cooling
Broan-NuTone
Heaters
Bare feet. Floor tile. Cold morning. That's when the advantages of Broan's® fan-forced heaters really hit home. These quality units are designed to deliver comforting warmth…
or Give us a Call
Product Summary
Bare feet. Floor tile. Cold morning. That's when the advantages of Broan's® fan-forced heaters really hit home. These quality units are designed to deliver comforting warmth in seconds. But there's more to Broan heaters than comfort alone. They also can provide you with true zone heating capability. So you can leave your central thermostat set at lower levels for significant energy savings, while quickly creating your own personal comfort zone in the room you are in. Most models include built-in thermostats for automatic temperature control. Or choose from our extensive offering of accessory thermostats, timers and wall controls for the ultimate in convenient heater control.
Construction and Materials
Broan-NuTone, a leading name in home comfort solutions, offers a range of heating products designed for efficient and targeted warmth. These products, falling under the Heating & Cooling category, encompass wall heaters, kickspace heaters, and ceiling heaters, each engineered with specific applications in mind.
The construction of Broan-NuTone heating units emphasizes durability, safety, and ease of installation. Many models feature robust steel housings, designed to withstand the rigors of regular use and provide a clean, integrated look within the home. The internal components are typically crafted from high-quality materials to ensure reliable performance and longevity. For instance, heating elements are often constructed from durable alloys, and fan motors are selected for quiet operation and extended service life.
Safety features are paramount in the design of these heaters. Many units incorporate automatic thermal cut-off mechanisms to prevent overheating and ensure user safety. Additionally, designs often include features like recessed mounting options or protective grilles to minimize the risk of accidental contact with hot surfaces. The materials used are chosen not only for their heating efficacy but also for their fire-resistance and ability to maintain structural integrity under elevated temperatures.
Specific materials and construction details can vary depending on the product type:
- Wall Heaters: These units are often designed for recessed installation, meaning the primary body of the heater is built into the wall cavity, with only the grille or cover visible. The grille is typically made of sturdy steel or aluminum, powder-coated for a durable and aesthetically pleasing finish. Internal components include a powerful fan for air circulation and a heating element, often a nichrome wire or a ceramic element, encased for safety.
- Kickspace Heaters: Designed to fit discreetly beneath cabinets or countertops, kickspace heaters typically feature a low-profile design. Their construction involves a metal housing that can withstand the compact installation environment. The grille is usually made of durable metal, often aluminum or steel, allowing for efficient air intake and output. The heating elements are compact yet effective, and the fan is sized to provide directed airflow into the living space.
- Ceiling Heaters: Broan-NuTone ceiling heaters are engineered for integration into ceiling spaces, often in bathrooms or workshops where direct overhead heat is desired. These units typically feature a durable metal housing and a grille designed for flush mounting. The heating element is often a fan-forced coil or a ceramic element, ensuring quick and efficient heat distribution. The fan motor is designed for quiet operation and reliable performance in an overhead position.
Throughout their product lines, Broan-NuTone prioritizes the use of materials that contribute to both the functionality and the safety of their heating solutions. This includes corrosion-resistant metals for components that may be exposed to moisture, and high-grade plastics for electrical insulation and structural integrity where appropriate.
Energy Efficiency
Broan-NuTone offers a range of heating solutions designed with energy efficiency in mind, catering to various needs within wall heaters, kickspace, and ceiling categories. The brand emphasizes the development of products that provide effective warmth while minimizing energy consumption.
For wall heaters, Broan-NuTone focuses on delivering targeted heat precisely where it's needed, helping to avoid heating unoccupied spaces. This localized heating approach can contribute to overall energy savings by reducing the need for whole-house heating when only specific areas require warmth. Many of their wall heater models incorporate features designed to optimize performance and efficiency, such as:
- Quiet Operation: Many models are engineered for quiet performance, ensuring comfort without excessive noise.
- Durable Construction: Built with quality materials, these heaters are designed for longevity, reducing the need for frequent replacements.
- Easy Installation: Products are often designed for straightforward installation, potentially lowering labor costs and associated energy use during setup.
In the realm of kickspace heaters, Broan-NuTone provides compact yet powerful heating solutions that are ideal for installation in cabinets, under counters, or in tight spaces. These heaters are particularly effective in providing supplemental heat to areas that might otherwise be drafty or cool, such as kitchens and bathrooms. The efficiency in this category often stems from:
- Compact Design: Their small footprint allows for integration into existing cabinetry without significant structural modification.
- Focused Heat Output: Kickspace heaters deliver heat directly into the room from a low position, efficiently warming the living space.
- Safety Features: Many models include integrated safety features, such as overheat protection, contributing to reliable and safe operation.
Broan-NuTone's ceiling heating products are also developed with an emphasis on efficient heat distribution. These units are designed to be installed in ceilings, often in areas like bathrooms or basements, providing a discreet and effective source of warmth. Key efficiency aspects include:
- Even Heat Distribution: Ceiling heaters can help to create a more uniform temperature throughout a room by distributing heat from above.
- Thermostat Integration: Many models can be paired with compatible thermostats for precise temperature control, allowing users to set and maintain desired temperatures and avoid over-heating.
- Durable and Reliable: Broan-NuTone products are known for their robust construction, ensuring consistent performance and energy output over time.
Across all their heating product lines, Broan-NuTone aims to provide solutions that balance effective heating performance with responsible energy usage. The brand's commitment to quality engineering and thoughtful design contributes to the overall energy efficiency of their heating offerings.
Features and Benefits
Broan-NuTone offers a range of heating solutions designed to provide efficient and reliable warmth for various applications. These products focus on delivering comfort, energy efficiency, and durable performance. Product Features and Benefits: Wall Heaters:- Durable Construction: Built with robust materials to ensure long-lasting operation and resistance to wear and tear.
- Quiet Operation: Engineered for minimal noise, creating a more peaceful environment in your home or workspace.
- Efficient Heating: Designed to deliver consistent and effective warmth, helping to maintain a comfortable temperature without excessive energy consumption.
- Easy Installation: Many models are designed for straightforward installation, reducing setup time and potential costs.
- Safety Features: Incorporate safety mechanisms to prevent overheating and ensure safe operation.
- Versatile Design: Available in various sizes and wattages to suit different room dimensions and heating needs.
- Enhanced Comfort: Enjoy a consistently warm and inviting atmosphere, especially during colder months.
- Energy Savings: Efficient heating technology helps reduce energy bills by minimizing wasted heat.
- Reliable Performance: Depend on these heaters for consistent warmth, year after year.
- Peace of Mind: Safety features provide assurance of secure operation.
- Aesthetic Integration: Designed to blend seamlessly with existing room decor.
- Space-Saving Design: Compact units designed to fit discreetly under cabinets or in toe-kick areas, ideal for kitchens, bathrooms, and other areas where space is limited.
- Quick Heating: Provide rapid bursts of heat to quickly warm up small spaces or supplement central heating.
- Durable Components: Constructed with high-quality materials for reliable and long-term use.
- Integrated Controls: Many models feature built-in thermostats and fan controls for easy temperature management.
- Quiet Fan: Designed to operate with a low noise level, ensuring minimal disruption.
- Maximize Living Space: Frees up valuable wall and floor space by utilizing under-cabinet areas.
- Targeted Warmth: Delivers heat exactly where it's needed most, ideal for combating cold spots.
- Convenient Operation: Simple controls make it easy to adjust settings for optimal comfort.
- Reduced Drafts: Effectively combats cold air drafts near the floor.
- Efficient Heat Distribution: Designed to spread warmth evenly throughout a room from an overhead position.
- Durable Construction: Built to withstand the demands of overhead installation and provide lasting heat.
- Various Wattage Options: Available in a range of power outputs to accommodate different room sizes and heating requirements.
- Recessed or Surface Mount Options: Offer flexibility in installation to suit ceiling types and aesthetic preferences.
- Uniform Heating: Promotes consistent temperature distribution, eliminating hot and cold zones.
- Out-of-the-Way Installation: Keeps heating elements unobtrusive and safe from accidental contact.
- Effective for Larger Spaces: Suitable for heating larger rooms or areas where wall space is limited.
- Reliability and Durability: Broan-NuTone products are known for their robust construction, ensuring dependable performance and a long lifespan. This translates to fewer maintenance issues and a consistent source of warmth.
- Energy Efficiency: The focus on efficient heating technology helps consumers save on energy costs. By delivering warmth effectively and minimizing waste, these products contribute to lower utility bills.
- Comfort and Convenience: Designed with the user's comfort in mind, these heaters provide consistent and targeted warmth. Features like quiet operation and easy-to-use controls enhance the overall user experience.
- Space-Saving Solutions: Products like kickspace heaters offer innovative ways to add warmth without sacrificing valuable living or storage space, making them ideal for modern homes and renovations.
- Safety Assurance: Integrated safety features provide peace of mind, ensuring that the heating units operate securely and responsibly.
Options-Styles
Broan-NuTone offers a range of style options designed to complement various home aesthetics and heating needs. Their heating and cooling products, specifically focusing on wall heaters, kickspace heaters, and ceiling-mounted units, are engineered with both functionality and visual appeal in mind.
For Wall Heaters, Broan-NuTone provides options that integrate seamlessly into your room's design. These units are often available in neutral color schemes such as white or almond, allowing them to blend in with existing wall colors. The design focuses on clean lines and unobtrusive profiles, minimizing visual impact while maximizing heating efficiency. Some models may feature grilles with subtle patterns or textures that add a touch of understated elegance. The emphasis is on creating a sophisticated heating solution that doesn't detract from your interior décor.
Kickspace Heaters are designed for discreet installation beneath cabinets or countertops, making them an excellent choice for kitchens, bathrooms, or other areas where space is at a premium and a traditional heater would be out of place. The visible portion of these heaters typically features a low-profile grille, often in finishes like white or stainless steel, that can match surrounding cabinetry or appliances. The goal is to provide powerful heating without compromising the room's overall design and flow, offering a virtually invisible heating solution.
Ceiling Heaters, while primarily focused on powerful and efficient heating, also consider aesthetic integration. These units are designed to be installed in the ceiling, with visible components often featuring clean, minimalist grilles. Finishes like white are common, allowing the heater to blend with the ceiling. The design prioritizes a flush installation where possible, reducing the visual prominence of the unit and maintaining a clean ceiling line. The focus is on delivering robust heating performance while remaining as unobtrusive as possible within the room's architecture.
Across their heating and cooling product lines, Broan-NuTone generally adheres to a design philosophy that values:
- Neutral Color Palettes: Common options include white, almond, and sometimes stainless steel, enabling easy integration into diverse interior design schemes.
- Clean Lines and Minimalist Profiles: Products are designed to be sleek and unobtrusive, avoiding overly ornate or complex designs.
- Functional Grille Designs: Grilles are engineered not only for airflow but also to contribute to a subtle aesthetic, sometimes featuring gentle patterns or textures.
- Discreet Installation: Many options, especially kickspace and ceiling heaters, are specifically developed for minimal visual impact and integration into existing structures.
The overall style approach aims to provide homeowners with effective heating solutions that enhance, rather than detract from, their living spaces.
- Homepage
- Warranty
- About Us
- Customer Service
- Video
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Heating & Cooling products.
Hunter Fan Company
Ceiling Fans
Elevate the look of your home or business with stylish Hunter ceiling fans that come in a stunning variety of features, designs, colors and sizes.
or Give us a Call
Product Summary
Modern, traditional, rustic, industrial, coastal – we make fans in a variety of inspired styles so you can find an efficient, wobble-free design that seamlessly ties in with any room in your house. Each fan's construction can feature a variety of materials, including natural wood, metal and paint, to let you pick the style that's right for your room design. Select metal finishes that match the hardware and accessories in your room for a fully cohesive space.
At Hunter, we also offer a broad selection of damp- and wet-rated outdoor ceiling fans in multiple sizes and styles so you can enhance the comfort and appearance of your porches, pergolas, and other outside spaces, as well.
Energy Efficiency
Hunter Fan Company ceiling fans are designed with energy efficiency in mind, offering a cost-effective and environmentally friendly solution for home comfort. Many Hunter fans incorporate advanced motor technology and blade designs that significantly reduce energy consumption compared to traditional cooling methods.
Key Energy Efficiency Features:
- Damp and Wet Rated Construction: Select models are built to withstand humid environments, making them suitable for porches, patios, and bathrooms. This durable construction ensures longevity and consistent performance, contributing to long-term energy savings by avoiding premature replacement.
- High-Quality Motors: Hunter fans utilize powerful yet energy-efficient motors. These motors are engineered to provide optimal airflow while consuming less electricity, leading to lower energy bills.
- Optimized Blade Design: The shape, size, and pitch of Hunter fan blades are carefully engineered to maximize air movement and circulation. Efficient blade design means the fan can achieve desired cooling effects with lower motor speeds, further reducing energy usage.
- Reversible Motor Function: Many Hunter ceiling fans feature a reversible motor. In the summer, the fan rotates counter-clockwise to create a downdraft, circulating cool air. In the winter, reversing the direction to clockwise draws cool air up and pushes warm air down from the ceiling, helping to distribute heat more evenly and reduce reliance on heating systems. This dual functionality enhances overall home energy efficiency throughout the year.
- LED Lighting Integration: Numerous Hunter fans come equipped with integrated LED lighting. LED technology is significantly more energy-efficient than incandescent or CFL bulbs, consuming less power and lasting much longer, which translates to both energy and maintenance savings.
By choosing a Hunter Fan Company ceiling fan, consumers can benefit from:
- Reduced Electricity Bills: The inherent energy-saving features of these fans lead to noticeable reductions in monthly electricity costs.
- Lower Environmental Impact: Consuming less energy contributes to a smaller carbon footprint, making Hunter fans an eco-conscious choice.
- Extended Product Lifespan: The robust construction and efficient operation of Hunter fans contribute to their durability, reducing the need for frequent replacements.
Features and Benefits
Enhance your home's comfort and style with a premium ceiling fan from Hunter Fan Company. Engineered for superior performance and timeless design, Hunter ceiling fans offer an efficient and elegant solution for air circulation in any room.
Features and Benefits
- Powerful Airflow: Experience optimal comfort with high-velocity airflow designed to circulate air effectively throughout your space. This ensures a consistently comfortable environment, whether you need a gentle breeze or robust cooling.
- Quiet Operation: Enjoy peace and tranquility. Hunter fans are designed with whisper-quiet technology, allowing you to relax and enjoy the benefits of air circulation without distracting noise.
- Energy Efficiency: Save on energy costs. Hunter ceiling fans are built to be energy-efficient, providing effective cooling while consuming less power than traditional air conditioning units. Many models feature optimized motor technology for maximum efficiency.
- Durable Construction: Invest in quality that lasts. Hunter fans are crafted with high-quality materials and rigorous testing to ensure long-term durability and reliable performance.
- Stylish Designs: Complement your home's aesthetic. Hunter offers a wide range of fan styles, finishes, and sizes to match any decor, from modern minimalist to classic traditional.
- Integrated Lighting: Many models feature integrated LED lighting, providing both ambient illumination and convenient air circulation in one fixture. Control lighting brightness and fan speed easily.
- Remote and Wall Control Options: Enjoy convenient operation. Select models come with intuitive remote controls or stylish wall controls, allowing you to adjust fan speed, light settings, and direction with ease.
- Reversible Motor: Maximize year-round comfort. The reversible motor function allows you to set the fan to downdraft mode for cooling in the summer and updraft mode to help circulate warm air in the winter, reducing heating costs.
Core Advantages
- Unmatched Comfort: Hunter fans are meticulously designed to deliver superior airflow and consistent cooling, creating a more comfortable living space for you and your family.
- Reliability and Longevity: Built with the highest standards of craftsmanship, Hunter ceiling fans are renowned for their durability and long-lasting performance, offering peace of mind for years to come.
- Aesthetic Versatility: With a diverse collection of designs, Hunter fans seamlessly integrate into any home decor, enhancing both functionality and visual appeal.
- Smart Technology Integration: Many Hunter fans are designed to work with smart home systems, offering enhanced control and convenience through voice commands or mobile apps (where applicable).
Options-Styles
Hunter Fan Company offers a diverse range of style options for their ceiling fans, ensuring that there's a design to complement any home decor. These style choices cater to various aesthetic preferences, from classic and traditional to modern and minimalist.
Blade Finishes
The blade finishes are a key element in defining a fan's style. Hunter Fan Company provides a wide array of options:
- Wood Finishes: Available in natural wood tones like light oak, dark walnut, cherry, and bleached oak, these finishes add warmth and a natural element to a room. Reversible blades often feature different wood grain patterns or solid colors, offering versatility.
- Metallic Finishes: For a sleek and contemporary look, metallic blade finishes are offered. These include brushed nickel, polished nickel, brushed bronze, oil-rubbed bronze, stainless steel, and antique brass, providing a touch of sophistication.
- Solid Colors: Simple yet effective, solid color blades in white, black, and sometimes other neutral tones are available to blend seamlessly with existing decor or make a subtle statement.
- Painted Finishes: Beyond solid colors, some fans feature painted blades with unique patterns or textures, such as distressed finishes or faux marble, adding an artistic flair.
Housing Finishes
The housing, or motor casing, of the fan also comes in a variety of finishes to coordinate with the blades and the room's overall design:
- Metallic Finishes: Similar to blade finishes, housing options include brushed nickel, polished nickel, brushed bronze, oil-rubbed bronze, stainless steel, and antique brass. These metallic finishes often match or complement the metallic blade options.
- Matte and Painted Finishes: Matte black, matte white, and other painted finishes are popular for their modern appeal and ability to create a cohesive look.
- Wood-Look Finishes: Some housings incorporate wood-look details or finishes that mimic natural wood, adding an organic touch.
Light Kit Styles
Many Hunter ceiling fans feature integrated light kits, which further enhance their stylistic versatility. Light kit options include:
- Bowl Lights: Classic bowl-shaped shades, often made of frosted or etched glass, provide diffused ambient light.
- Dome Lights: Similar to bowl lights, dome shades offer a more rounded silhouette.
- Multi-Light Fixtures: Some fans feature multiple downlights or glass shades, offering more directed or decorative lighting.
- Glass Types: The glass for light kits can range from clear and seeded to frosted, etched, and opal, each providing a different diffusion and quality of light.
- Integrated LED: Many newer models feature integrated LED lighting, offering energy efficiency and often a more modern, streamlined design.
Blade Designs and Shapes
Beyond the finishes, the shape and number of blades also contribute to a fan's style:
- Number of Blades: While three, four, and five-blade configurations are common, Hunter also offers fans with more blades for a fuller appearance or fewer blades for a more minimalist aesthetic.
- Blade Shapes: Blades can range from traditional straight-edged designs to more sculpted or curved shapes, influencing the overall visual impact of the fan.
Mounting Options
The way a fan is mounted can also affect its style and suitability for different ceiling heights:
- Standard Mount: The most common flush or downrod mount.
- Low-Profile Mount: Designed for rooms with lower ceilings, providing a sleek, close-to-ceiling look.
- Extended Downrod Mount: For rooms with very high ceilings, allowing the fan to be positioned at an optimal airflow height.
Through this extensive selection of finishes, light kit styles, blade designs, and mounting options, Hunter Fan Company allows consumers to personalize their ceiling fan to perfectly match their interior design vision.
Construction and Materials
The construction of Hunter Fan Company ceiling fans emphasizes durability and aesthetic appeal, utilizing a range of materials designed for both performance and longevity.Construction Highlights
* **Motor Housing:** Typically constructed from robust metal alloys, often steel, to ensure stability and minimize vibration. Finishes vary to complement different decor styles. * **Blades:** Available in a variety of materials, including: * **Wood:** Often crafted from select hardwoods, sometimes featuring decorative veneers or hand-carved details. Wood blades are known for their natural beauty and often contribute to a quieter operation. * **Metal:** Steel or aluminum are used for a modern or industrial look, offering durability and a sleek appearance. * **Plastic/Composite:** High-quality ABS plastic or other composite materials are employed for lighter weight, moisture resistance, and cost-effectiveness, especially in damp or wet-rated applications. * **Mounting System:** Engineered for secure installation, this includes: * **Canopy:** The decorative cover that conceals the ceiling junction box and mounting hardware. It is usually made of metal to match the fan's housing. * **Downrod:** A metal (typically steel) rod that suspends the fan from the ceiling. Lengths vary to accommodate different ceiling heights. * **Mounting Bracket:** A sturdy metal component that attaches to the ceiling electrical box, providing a secure anchor point for the fan. * **Light Kits (Optional):** When included, light kits often feature: * **Glass Shades:** Available in various styles such as frosted, clear, seeded, or etched glass, adding decorative illumination. * **Metal Fixtures:** To match the fan's housing and hardware. * **Hardware:** Screws, bolts, and other fasteners are generally made of steel for strength and corrosion resistance.Materials Overview
Hunter Fan Company employs a selection of materials chosen for their quality and suitability for ceiling fan applications. * **Metals:** Steel and aluminum are foundational for motor housings, downrods, mounting brackets, and decorative accents. These metals provide structural integrity and a premium feel. * **Wood:** High-grade hardwoods are selected for their aesthetic qualities and acoustic properties, contributing to a quieter fan experience. * **Plastics and Composites:** Engineered plastics and composites offer a balance of durability, lightweight design, and resistance to environmental factors like moisture, making them suitable for a wider range of installation locations. * **Glass:** Used for light shades, glass components add a decorative element and diffuse light effectively. Various types of glass are used to achieve different aesthetic effects.- Homepage
- Products
- Accessories
- Instructions
- Warranty
- About Us
- Video
- Photo Gallery
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Heating & Cooling products.
Mr. Heater
Heaters
Mr. Heater's specialized heating products brings comfort to millions of people where they live, work and play.
or Give us a Call
Product Summary
Construction and Materials
The Mr. Heater Corporation offers a range of heating solutions designed for various applications, from residential comfort to outdoor recreational activities. While specific construction details and materials vary across their product lines, the company emphasizes durability, safety, and efficient performance in their designs.
Many of Mr. Heater's portable propane heaters, a prominent category within their offerings, are constructed with robust steel cabinets. These cabinets are often powder-coated to resist rust and corrosion, ensuring longevity even in demanding outdoor environments. The internal components typically include high-quality burners, safety valves, and regulators designed for reliable operation. For their convection and radiant heaters, materials such as stainless steel are frequently utilized for burner assemblies and heat exchangers, contributing to both heat transfer efficiency and resistance to high temperatures.
Mr. Heater also produces a line of electric heaters, which often feature durable metal housings, designed for safety and heat dissipation. Heating elements within these units are typically made from materials like nichrome wire, known for its resistance to heat and electrical conductivity. Safety features, common across all product types, often incorporate tip-over switches, overheat protection, and sturdy guards to prevent accidental contact with hot surfaces.
Specific materials found in Mr. Heater products include:
- Steel: Commonly used for main housings, cabinets, and grilles due to its strength and durability. Powder coating is often applied for enhanced corrosion resistance.
- Stainless Steel: Frequently employed in burner components, heat exchangers, and certain decorative elements for its superior heat resistance and longevity.
- Aluminum: May be used in specific components for its lightweight properties and good thermal conductivity.
- Ceramic: Incorporated into certain heating elements or ignition systems for its heat-resistant properties.
- High-Impact Plastics: Used for control knobs, handles, and other non-heating components where durability and user safety are paramount.
- Brass and Copper: Often found in gas valves, regulators, and connection fittings due to their corrosion resistance and reliability in gas flow control.
The construction focuses on ensuring ease of use, portability (for many models), and effective heat output. For instance, their infrared heaters are designed to radiate heat directly, while convection heaters circulate warm air throughout a space. Safety mechanisms are integrated throughout the design process to meet industry standards.
Energy Efficiency
Mr. Heater Corporation offers a range of heating solutions designed to provide warmth in various settings, with a focus on efficient operation. While specific energy efficiency ratings or comparative metrics are not detailed on their website, the design and functionality of their products point towards an emphasis on delivering effective heating with mindful energy usage.
For their portable propane heaters, efficiency is often realized through direct heat projection, meaning the heat is generated and immediately directed towards the intended space, minimizing ambient heat loss. This approach ensures that a significant portion of the generated heat is utilized for warming the target area.
Key features contributing to efficient operation across their product lines can include:
- Thermostatic Control: Many Mr. Heater models incorporate adjustable thermostats. This allows users to set a desired temperature, and the heater will cycle on and off as needed to maintain that temperature, preventing unnecessary energy consumption and overheating.
- High Heat Output: Products are engineered to deliver substantial heat quickly. This can translate to efficiency by reaching the desired warmth faster, potentially reducing the overall run time required.
- Durable Construction: The robust build of Mr. Heater products is designed for longevity and reliable performance. While not a direct energy efficiency metric, well-maintained and durable equipment is less likely to develop issues that could lead to energy waste.
- Variety of Fuel Sources: Mr. Heater offers heaters utilizing different fuel sources, including propane and natural gas. The inherent efficiency of these fuel sources, coupled with the heater's design, plays a role in the overall energy output and utilization.
- Safety Features: Integrated safety mechanisms, such as tip-over switches and oxygen depletion sensors, while primarily for user protection, also contribute to safe and controlled operation, which indirectly supports efficient energy use by preventing unintended shutdowns or hazardous conditions.
For outdoor and patio heaters, efficiency is achieved through directed radiant heat, which warms objects and people directly rather than attempting to heat the air, a less efficient endeavor in open or semi-open environments. The design aims to maximize the coverage and impact of the heat generated.
Features and Benefits
Mr. Heater offers a range of heating solutions designed to provide warmth and comfort in various environments. Their products are engineered for performance, durability, and ease of use, catering to both indoor and outdoor applications.
Whether you need to take the chill off a patio, warm up a garage, or ensure comfort in a workshop, Mr. Heater products are built to deliver reliable heat. The brand focuses on delivering effective heating solutions that are accessible and dependable for everyday use.
Core Advantages
- Reliable Heating Performance: Mr. Heater products are designed to provide consistent and effective heat, ensuring comfort in a variety of conditions.
- Durable Construction: Built with quality materials, these heaters are made to withstand regular use and provide long-lasting service.
- Versatile Applications: Suitable for both indoor and outdoor settings, offering flexibility for different heating needs.
- User-Friendly Design: Emphasis is placed on making the products easy to operate and maintain, providing a straightforward heating experience.
Features and Benefits
- For Outdoor Spaces: Transform your patio, deck, or balcony into a comfortable gathering area even in cooler weather. Enjoy extended outdoor living with reliable warmth.
- For Workshops and Garages: Keep your workspace comfortable and productive year-round. Eliminate the discomfort of cold environments, allowing for better focus and efficiency.
- For Indoor Comfort: Supplement your home heating or provide localized warmth where needed. Efficiently heat specific areas, reducing reliance on whole-house systems.
- Engineered for Efficiency: Mr. Heater products are designed with a focus on delivering optimal heat output while considering operational factors.
- Safety Features: Products incorporate safety mechanisms to ensure peace of mind during operation. (Note: Specific safety features vary by model and are detailed in individual product documentation.)
- Variety of Heating Technologies: The product line may include different heating technologies to suit diverse preferences and applications. (Note: Specific technologies vary by model.)
Options-Styles
Mr. Heater offers a range of style options to suit various needs and preferences for their heating solutions. While specific aesthetic choices can vary by model, the brand generally focuses on functional design that prioritizes durability and performance.
The primary style considerations for Mr. Heater products revolve around their intended application:
- Outdoor Heaters: These units are typically designed with robust construction to withstand outdoor elements. Common finishes include powder-coated steel in neutral colors like black, bronze, or stainless steel. The form factor often emphasizes portability or permanent installation, with designs ranging from patio heaters with a classic umbrella-top silhouette to wall-mounted units for more integrated solutions. Safety features are often visually apparent, such as protective grilles and stable bases.
- Indoor Heaters: For indoor applications, Mr. Heater provides options that balance heating power with a more refined aesthetic suitable for living spaces or workshops. This can include portable propane heaters with a durable, utilitarian design, often featuring a propane tank housing integrated into the unit. Electric heaters may present a sleeker profile with a focus on user-friendly controls and a more compact footprint. Materials are generally chosen for safety and longevity, with a focus on efficient heat distribution.
In summary, Mr. Heater's style options are characterized by a commitment to:
- Durability: Utilizing materials and finishes that can endure demanding environments, whether outdoors or in a workshop setting.
- Functionality: Designs are driven by the need for efficient and safe heating, with features that are practical and easy to operate.
- Versatility: Offering solutions that can be integrated into various settings, from open patios to enclosed garages.
- Homepage
- Products
- Catalog
- Accessories
- Instructions
- Warranty
- About Us
- Video
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Heating & Cooling products.
Schluter Systems
Electric Floor Warming System
Combine the beauty and durability of tile with the comfort of the Schluter DITRA-HEAT electric floor warming system to bring a touch of luxury into any room of the home.
or Give us a Call
Product Summary
Combine the beauty and durability of tile with the comfort of an electric floor warming system to bring a touch of luxury into any room of the home. DITRA-HEAT is the only electric floor warming system that directly incorporates uncoupling technology to ensure that floors aren't susceptible to cracked tiles and grout. Cables can be placed wherever heat is desired for customized heating zones, and no leveling compounds are required, which makes for a quick and easy installation.
With the proven technology of our DITRA uncoupling membrane incorporated in the design, DITRA-HEAT provides the ideal solution for bringing comfort and floor warming to any tiled floor.
Construction and Materials
Schluter Systems offers a range of electric floor heating systems designed for comfortable and efficient heating of interior spaces. These systems are engineered to be installed beneath tile, stone, and other floor coverings.
The core components of Schluter's electric floor heating systems are the heating cable and the mat. The heating cable is a thin, durable wire that generates heat. It is typically made of a heat-resistant polymer insulation with a robust outer jacket for protection. The heating mat, often referred to as DITRA-HEAT-DUO or DITRA-HEAT, features a fleece webbing that incorporates channels for the heating cable. This fleece webbing is also designed to provide uncoupling and crack isolation for the finished floor, similar to Schluter's uncoupling membranes.
Construction and Materials:
- Heating Cable: Constructed with a high-performance heating element encased in a durable, heat-resistant insulation. A protective outer jacket ensures longevity and safety. The cable's thin profile allows for easy integration into mortar or self-leveling compounds.
- Heating Mat (DITRA-HEAT-DUO / DITRA-HEAT):
- Fleece Webbing: The primary material of the mat is a polyethylene sheet with a fleece webbing. This webbing forms recessed channels where the heating cable is laid.
- Uncoupling Properties: The fleece webbing also provides the uncoupling function, allowing for movement between the substrate and the finished floor, thereby preventing cracks in the tile or stone.
- Waterproofing (DITRA-HEAT-DUO): The DITRA-HEAT-DUO mat integrates a waterproofing and vapor-pressure-dissipating function, making it suitable for wet areas.
- Sound Reduction (DITRA-HEAT-DUO): DITRA-HEAT-DUO also offers sound insulation properties.
- Thermostat: A critical component for controlling the floor temperature. These are typically electronic thermostats with digital displays and programming capabilities, allowing users to set desired temperatures and schedules. Materials include plastic housings for the control unit and wiring connections.
- Accessories: Schluter Systems also provides accessories such as cable staples for securing the heating cable during installation, connection kits, and junction boxes, which are constructed from standard electrical materials.
Installation Process Overview:
The installation process generally involves laying the heating mat directly onto the substrate. The heating cable is then snapped into the channels within the mat. Once the cable is installed and tested, a thin-set mortar or self-leveling compound is applied over the mat and cable. Finally, the tile or stone covering is installed over the cured mortar or compound.
Energy Efficiency
Schluter Systems offers advanced electric floor heating solutions designed for energy efficiency, providing comfortable warmth while minimizing energy consumption.
The core of Schluter's energy-efficient floor heating systems lies in their precise temperature control. Systems like the Schluter®-DITRA-HEAT-DUO and Schluter®-DITRA-HEAT-TB, when paired with appropriate thermostats, allow for customized heating schedules and zone control. This means you only heat the areas you need, when you need them, and to the exact temperature you desire, preventing wasted energy.
Key aspects contributing to the energy efficiency of Schluter electric floor heating systems include:
- Targeted Heating: Unlike whole-house HVAC systems that heat air, electric floor heating warms surfaces directly, delivering comfort at lower air temperatures, which can lead to significant energy savings.
- Quick Response Time: The heating cables and mats are designed for rapid heat-up, allowing the system to reach the desired temperature quickly and efficiently. This enables users to program the system for shorter heating periods.
- Insulation Properties: Products such as Schluter®-DITRA-HEAT-DUO incorporate a unique air-gap membrane and fleece layers that provide uncoupling and waterproofing, as well as thermal insulation. This insulation helps to direct heat upwards into the heated space, reducing heat loss downwards into the subfloor, thereby enhancing overall efficiency.
- Smart Thermostat Integration: Schluter electric floor heating systems are compatible with a range of intelligent thermostats, including programmable and Wi-Fi enabled models. These thermostats offer advanced scheduling capabilities, learning functions, and remote control via smartphone apps, further optimizing energy usage and allowing for personalized comfort settings.
- Low Wattage Density: The heating cables are designed with a low wattage density, meaning they distribute heat evenly over a larger area at a lower power output. This contributes to a more consistent and energy-conscious heating experience.
By integrating these features, Schluter Systems aims to provide a comfortable and efficient heating solution that contributes to reduced energy bills and a lower environmental impact.
Features and Benefits
Schluter Systems offers a range of electric floor heating solutions designed to bring comfort and luxury to any tiled or stone environment. These systems provide even and consistent warmth, transforming cold floors into a cozy sanctuary.
Schluter® DITRA-HEAT-DUO® - Electric Floor Heating System
Schluter® DITRA-HEAT-DUO® is an innovative electric floor heating system that combines uncoupling, waterproofing, and sound control with heating capabilities. It is designed for installation directly beneath tile and stone flooring.
Features:
- Uncoupling Membrane: Prevents tiles from cracking due to movement in the substrate.
- Waterproofing: Creates a waterproof layer, protecting the substrate from moisture.
- Sound Control: Reduces impact sound transmission by up to 13 dB.
- Integrated Heating Cables: The heating cables are integrated into the mat, simplifying installation.
- Thinner Profile: Designed to be thinner than traditional underlayment systems, minimizing height buildup.
- Easy Installation: The mat's stud structure provides an easy-to-follow pattern for cable placement.
- DIY Friendly: Designed for straightforward installation for both professionals and DIY enthusiasts.
- Suitable for Various Substrates: Can be installed over concrete, cement board, and other stable substrates.
Benefits:
- Enhanced Comfort: Provides consistent and comfortable warmth underfoot, eliminating cold spots.
- Floor Protection: Protects tile and stone installations from cracking caused by substrate movement.
- Moisture Management: Safeguards the subfloor from water damage.
- Reduced Noise: Contributes to a quieter living environment by dampening sound.
- Streamlined Installation: Combines multiple functions into one product, saving time and labor.
- Aesthetic Integration: Seamlessly integrates heating into the floor without compromising design.
- Energy Efficiency: Allows for targeted heating, potentially leading to energy savings.
Schluter® DITRA-HEAT® - Electric Floor Heating System
Schluter® DITRA-HEAT® is a revolutionary electric floor heating system that provides uncoupling and waterproofing, with integrated heating cables designed for installation directly beneath tile and stone.
Features:
- Uncoupling Membrane: Ensures that tile and stone installations are protected from cracks originating from the substrate.
- Waterproofing: Creates a reliable waterproof barrier for the subfloor.
- Integrated Heating Cables: The heating cables are designed to be easily snapped into the mat's stud structure.
- Flexible Cable Placement: The stud pattern allows for flexible spacing of the heating cables to achieve desired heat output.
- Simple Installation Process: The mat's design simplifies cable routing and attachment.
- Can be Installed Directly on Substrate: Reduces installation height and complexity.
- Compatible with Various Floor Coverings: Ideal for use with tile, stone, and other floor finishes.
Benefits:
- Superior Floor Performance: Prevents cracking of tiles and grout lines due to substrate movement.
- Protection Against Moisture: Effectively shields the subfloor from water penetration.
- Customizable Heating: Allows for precise control over heat distribution based on room layout and needs.
- Efficient Installation: The integrated system speeds up the installation process compared to traditional methods.
- Luxurious Warmth: Delivers a consistently warm and comfortable floor surface.
- Durable and Reliable: Built to last and maintain its performance over time.
Core Advantages of Schluter Electric Floor Heating Systems:
- All-in-One Solution: Schluter electric floor heating systems combine essential functions like uncoupling, waterproofing, and heating into a single, integrated system, streamlining installation and reducing the need for multiple products.
- Reliable Performance: Engineered for durability and long-term performance, these systems protect floor installations from cracking and moisture damage while delivering consistent warmth.
- Ease of Installation: The intuitive design of the DITRA-HEAT and DITRA-HEAT-DUO mats, with their integrated stud structures, makes cable placement simple and efficient for both professionals and DIYers.
- Enhanced Comfort and Luxury: These systems transform ordinary floors into comfortable, heated surfaces, adding a touch of luxury and increasing the overall enjoyment of a living space.
Options-Styles
Schluter Systems offers a comprehensive range of style options for their electric floor heating systems, designed to integrate seamlessly with various aesthetic preferences and functional requirements. These options primarily revolve around the variety of uncoupling membranes and waterproofing solutions that are compatible with the heating cables and mats.
The core of Schluter's style integration lies in its uncoupling membranes, which serve a dual purpose: they prevent tile or stone assemblies from cracking due to differential movement, and they provide a base for the heating elements. The aesthetic style is therefore determined by the choice of finishing material laid over these membranes, such as tile, stone, or other flooring types.
- Schluter®-DITRA: This is a versatile uncoupling membrane that is ideal for a wide range of finishing materials. Its bonded-on structure allows for the integration of Schluter®-DITRA-HEAT or Schluter®-DITRA-HEAT-DUO directly onto its surface, providing a heated and waterproofed underlayment. The style of the final floor is entirely dependent on the tile, stone, or other suitable flooring chosen to be installed over the DITRA membrane.
- Schluter®-DITRA-HEAT: This is a uncoupling membrane with integrated heating cable channels. The design allows for the heating cable to be embedded directly within the membrane, creating a uniform heated surface. The style here is dictated by the top layer of flooring, with the DITRA-HEAT providing a stable and crack-resistant foundation.
- Schluter®-DITRA-HEAT-DUO: This variant of DITRA-HEAT offers enhanced sound control and thermal break properties in addition to uncoupling and integrated heating cable channels. Similar to DITRA-HEAT, the stylistic outcome of the floor is determined by the chosen finishing material installed atop the system.
Beyond the uncoupling membranes, Schluter Systems also provides complementary waterproofing solutions that contribute to the longevity and performance of the heated floor system. These solutions ensure that the heating elements are protected from moisture, a critical factor for both durability and safety. The style is not directly impacted by these waterproofing elements as they are concealed beneath the finishing floor layer.
The flexibility of Schluter's electric floor heating systems means that virtually any style of tile, stone, or other compatible flooring can be used. Whether the desired aesthetic is modern and minimalist with large format porcelain tiles, rustic and warm with natural stone, or classic with ceramic tiles, the Schluter electric floor heating system can accommodate it. The system’s design focuses on providing a reliable and robust heated substrate, allowing the homeowner or designer complete freedom in selecting the visual style of the finished floor.
- Homepage
- Products
- Ideas, Tips & Tools
- Specifications
- Warranty
- About Us
- Video
- Photo Gallery
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Heating & Cooling products.
Westinghouse Lighting
Ceiling Fans
Our wide array of ceiling fans really turns heads. With over 149 items, there's a fan for every room and every style. We also offer a variety of fans featuring Westinghouse…
or Give us a Call
Product Summary
A ceiling fan should do more than circulate air. A ceiling fan should create a mood, an environment, and add a touch of cool to people's homes. It should also stand the test of time functionally, as well as architecturally. This is exactly what our designers have in mind when developing Westinghouse Lighting products.
Energy Efficiency
This Westinghouse Lighting ceiling fan is designed with energy efficiency in mind. While specific ENERGY STAR ratings or kilowatt-hour consumption figures are not detailed on the product pages, the brand emphasizes the use of DC motors in many of its modern ceiling fan models. DC motors are inherently more energy-efficient than traditional AC motors, consuming significantly less electricity for the same airflow output.
Key features contributing to energy efficiency found across Westinghouse Lighting's fan offerings include:
- DC Motor Technology: Many contemporary Westinghouse fans utilize Direct Current (DC) motors. These motors are known for their reduced energy consumption, often using up to 70% less energy compared to standard AC motors. This translates to lower electricity bills and a more sustainable operation.
- Variable Speed Settings: The availability of multiple speed settings allows users to tailor the fan's performance to their needs, only using the necessary amount of energy. Lower speeds consume less power, making them ideal for maintaining a comfortable ambient breeze.
- Reverse Functionality: The reverse function, commonly found on Westinghouse fans, contributes to year-round energy efficiency. In the summer, it circulates air downwards to create a cooling effect. In the winter, by reversing the blade direction, it gently pushes warm air trapped at the ceiling downwards, helping to reduce reliance on heating systems and save energy.
- LED Lighting (where applicable): Many Westinghouse ceiling fans come equipped with integrated LED light kits. LED technology is highly energy-efficient and long-lasting, consuming a fraction of the energy of incandescent or halogen bulbs while providing comparable or superior illumination.
By incorporating these features, Westinghouse Lighting aims to provide consumers with effective air circulation solutions that also minimize energy usage and reduce their carbon footprint.
Features and Benefits
The Westinghouse Lighting collection of ceiling fans offers a blend of style, performance, and energy efficiency designed to enhance the comfort and aesthetic of any home. Engineered for superior air circulation, these fans provide a refreshing breeze while contributing to a visually appealing atmosphere.
Westinghouse ceiling fans are crafted with quality materials and meticulous attention to detail, ensuring durability and lasting performance. They are available in a diverse range of styles, from contemporary and sleek to traditional and ornate, allowing homeowners to find the perfect match for their interior décor. Each fan is designed to operate quietly, providing effective cooling without disruptive noise.
Features and Benefits
- Efficient Air Circulation: Designed to move a significant volume of air, Westinghouse ceiling fans create a comfortable environment by effectively distributing cool air in the summer and circulating warm air in the winter, potentially reducing reliance on HVAC systems.
- Energy Savings: By promoting air movement, these fans can make rooms feel cooler, allowing users to raise their thermostat settings and save on energy costs. In cooler months, reversing the fan direction can help push warm air down, further contributing to energy efficiency.
- Stylish Design Options: A wide array of aesthetic choices, including various finishes, blade designs, and sizes, allows for seamless integration into any room's décor, from modern living spaces to classic bedrooms.
- Quiet Operation: Engineered for smooth and silent performance, Westinghouse fans deliver powerful airflow without introducing distracting noise, ensuring a peaceful ambiance.
- Durable Construction: Built with high-quality components, these fans are designed for longevity and reliable operation, providing consistent performance for years to come.
- Integrated Lighting (on select models): Many Westinghouse ceiling fans feature integrated light fixtures, offering both illumination and air circulation from a single, attractive fixture, simplifying room design and functionality.
- Reversible Fan Function: The ability to reverse the fan's direction allows for optimized comfort throughout the year, enhancing cooling in warmer months and helping to redistribute heat in colder months.
Core Advantages
- Enhanced Home Comfort: Westinghouse ceiling fans provide immediate and noticeable improvements in room comfort through effective air circulation, creating a more pleasant living or working environment.
- Cost-Effective Operation: The energy-saving capabilities, coupled with their efficient performance, make Westinghouse fans a practical choice for reducing household utility bills.
- Aesthetic Versatility: With a broad selection of designs, homeowners can easily find a fan that not only functions effectively but also serves as a stylish accent piece, complementing and elevating interior design schemes.
- Reliable Performance: The commitment to quality in materials and manufacturing ensures that Westinghouse ceiling fans deliver consistent, quiet, and durable performance, providing peace of mind to the user.
Options-Styles
Westinghouse Lighting offers a diverse range of ceiling fan styles to complement any home decor. Their collection emphasizes both aesthetic appeal and functional performance, ensuring a perfect fit for various design sensibilities.
The available styles can be broadly categorized as follows:
- Modern & Contemporary: These fans often feature clean lines, minimalist designs, and sleek finishes such as brushed nickel, chrome, or matte black. They are ideal for spaces seeking a sophisticated and up-to-date look. Materials may include metal, glass, and high-quality plastics.
- Traditional & Classic: For those who prefer timeless elegance, Westinghouse offers fans with richer finishes like oil-rubbed bronze, antique brass, or brushed pewter. These styles often incorporate decorative elements, intricate detailing, and sometimes frosted or opal glass shades, evoking a sense of warmth and familiarity.
- Industrial: These designs draw inspiration from factory and workshop aesthetics, featuring robust construction, exposed hardware, and often a darker, more utilitarian color palette. They can include features like cage-style lighting or metal blades, bringing a rugged charm to a space.
- Transitional: Bridging the gap between modern and traditional, transitional fans offer a versatile aesthetic. They typically blend classic silhouettes with contemporary finishes, making them adaptable to a wide array of interior styles.
- Farmhouse & Rustic: These fans evoke a comfortable, country-inspired feel. Common finishes include distressed wood tones, matte black, and brushed bronze. Details such as faux-wood blades, barn-style lighting fixtures, and vintage-inspired hardware are characteristic of this style.
Beyond these overarching styles, Westinghouse Lighting also offers fans with specific features that contribute to their stylistic presentation, including:
- Blade Finishes: A wide variety of blade finishes are available, ranging from natural wood grains (oak, cherry, walnut) and painted solid colors (white, black, gray) to metal finishes and unique textures.
- Light Fixture Integration: Many fans are designed with integrated lighting kits, featuring different shade materials (glass, metal, fabric) and bulb configurations to enhance both illumination and decorative appeal. Options include single-bulb fixtures, multi-light sets, and decorative globes.
- Motor Housing Finishes: The motor housing is a prominent element of the fan's design. Westinghouse offers a broad spectrum of finishes to match or contrast with other room elements, including various shades of metallic finishes, wood grains, and solid colors.
- Blade Designs: While the material and finish of the blades are significant, their shape and number also contribute to the overall style. Fans can feature traditional three-blade designs, more elaborate five-blade configurations, or even uniquely shaped blades for a modern edge.
The selection aims to provide a comprehensive solution for homeowners seeking to enhance both the comfort and the visual appeal of their living spaces with a ceiling fan that perfectly matches their personal style.
Construction and Materials
This Westinghouse Lighting ceiling fan is designed to provide both comfort and aesthetic appeal to any room. Its construction focuses on durable materials and efficient operation, typical of the brand's commitment to quality in the heating and cooling fan category.
Construction and Materials:
- Motor Housing: The motor housing is constructed from high-quality metal, often finished in brushed nickel, bronze, or white, offering a sleek and durable exterior that complements various decor styles. This robust housing protects the internal components and contributes to the fan's overall longevity.
- Fan Blades: The fan blades are typically crafted from engineered wood or durable ABS plastic. These materials are chosen for their balance of weight, strength, and aerodynamic properties, ensuring efficient air movement. The blades are often reversible, allowing for a different finish on each side to match seasonal decor or personal preference. Common blade finishes include wood grains like walnut or maple, or solid colors such as white or black.
- Mounting System: A sturdy downrod system is used for mounting the fan, ensuring secure attachment to the ceiling. This system is engineered to minimize wobble during operation.
- Light Fixture (if applicable): Many models include an integrated light fixture. The shades are commonly made from frosted opal glass, providing diffused and pleasant illumination. The fixture itself is usually made from the same metal as the motor housing, maintaining a cohesive design.
- Pull Chains/Remote Control: For fan speed and light control, pull chains made of metal or fabric are often employed. More advanced models may come with a remote control system for convenient operation from across the room.
Features:
- Motor: The fan is powered by a high-performance motor engineered for quiet operation and energy efficiency. These motors are designed to provide consistent airflow over many years of use.
- Blade Pitch: The engineered blade pitch is optimized to move a significant amount of air, indicated by its airflow (CFM) rating, ensuring effective cooling.
- Reversible Function: The fan typically offers a reversible motor function. In summer, it circulates air downward for a cooling effect. In winter, it can be reversed to draw cooler air up and push warmer air down from the ceiling, helping to circulate heat and reduce heating costs.
- Homepage
- Products
- Accessories
- About Us
- Video
-
Green - Environmental
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Heating & Cooling products.
